Thanks. I will give this a go and see what happens

I would assume that as the light on the switch is showing Green rather than Orange that this would suggest that there is pressure in the system. I'm happy to take it to a garage if it is pressure but don't want to pay £70 to find out it is not the problem. I take it the switch engages the clutch on ...

My aircon always had an orange light on the switch and did not work so last year I tool it to a garage and they recharged it and it worked for the summer. Just tried it today and although the light on the switch is still green rather than orange it does not appear to be working.

Does anyone know if ...

I am trying to fit an alarm to my 96 Bongo and the instruction that I have are for a later model that has different wiring. I have been looking at the wiring diagrams but can anyone clarify the colours of the following for me:

Permanent Live (Fuse Box)
Ignition Live (Fuse Box)
Indicators (Left and ...

Thanks for the information. There were no instructions with the pads. Do you know which pad / location they are meant to be attached to?

I was replacing my front brake pads yesterday (2.5 TD) and the new pads came with 4 clips that did not appear to be on the existing ones. Can anyone let me know what these are for?

Thanks
Jim

Thanks, it is the o/s rear that I need to remove? Do you know if replacement clips are available? I have looked on a few websites and they do not seem to list them

Does anyone know how to remove the rear side trim on a 1996 2.5td? The only post I can fund says to pull out the sprung clips but with no indication where they are?

Hi, my Bongo 2.5TD has been off the road for a few months and i am nervous about causing damage when starting it if the oil has all drained from the engine. Is there a recomended way to do this? I thought i could remove the plug from the cut off solenoid and crank it a few times prime the engine ...

Thanks for all of the replies. Looks like i have my weekend planned!

Thanks. I will give this a go. I have also been reading that the gause on the oil pickup can get blocked. Just wandering if it is worth dropping the sump pan and having a look at this too. Does anyone know if is likely and if it is a trick job?

I think i may know someone who has a guage i can borrow. I take it it connects in place of the oil pressure sensor? Does the oil need to be drained to connect this up?

Do you know what the host and cold pressures should be?

Changed the oil to 10w40 and put in a new Blueprint filter over the and this is still happening. I have spoken to a few garages and some of them say it is normal and others say not.

Can anyone tell me how long their oil light stays on for on a cold start?

Thanks. I spoke to a guy yesterday who said the oil I used is too thin. I put in 5w30 which I thought was right but I am going to change it to 10w40 like he suggested and I have ordered a blueprint filter so hopefully that will do it