Hi everyone,
Rear speakers haven't worked since I bought my Bongo, and was hoping to install some new ones. I did a search on here and found that while it seems to be a common thing for the rear speakers not to be there at all, most people mentioned having the wiring already in place ready for a set to be installed. I pulled the o/s panel back (breaking a few clips in the process, no idea how you guys get it off without snapping things!) and could only see what I think is the cable for the petrol cap opener, and then a cable heading to the rear lights. Not sure if I'm missing something - what would it look like? And if there's nothing, I'm guessing that fitting rear speakers would mean quite a long job running wires from the cd player?
Not sure if the picture is much use: https://drive.google.com/file/d/1ttwBuw ... uOOQw/view
Rear Speaker Wiring
Moderators: Doone, westonwarrior
Re: Rear Speaker Wiring
Usually a small two pin socket taped up to the loom, ready to be plugged in to the speaker plug.
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
Re: Rear Speaker Wiring
Thanks, unfortunately I can't see anything like that - so I'm guessing that installing rear speakers would involve a slightly bigger job!