Rear Speaker Wiring

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
stevlor
Bongonaut
Posts: 58
Joined: Mon Apr 11, 2016 9:33 am
Location: Leeds, UK

Rear Speaker Wiring

Post by stevlor » Wed Sep 14, 2016 8:49 pm

Hi everyone,

Rear speakers haven't worked since I bought my Bongo, and was hoping to install some new ones. I did a search on here and found that while it seems to be a common thing for the rear speakers not to be there at all, most people mentioned having the wiring already in place ready for a set to be installed. I pulled the o/s panel back (breaking a few clips in the process, no idea how you guys get it off without snapping things!) and could only see what I think is the cable for the petrol cap opener, and then a cable heading to the rear lights. Not sure if I'm missing something - what would it look like? And if there's nothing, I'm guessing that fitting rear speakers would mean quite a long job running wires from the cd player?

Not sure if the picture is much use: https://drive.google.com/file/d/1ttwBuw ... uOOQw/view
User avatar
g8dhe
Supreme Being
Posts: 10754
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.

Re: Rear Speaker Wiring

Post by g8dhe » Wed Sep 14, 2016 9:52 pm

Usually a small two pin socket taped up to the loom, ready to be plugged in to the speaker plug.
Geoff
2001 Aero V6, AFT, full side conversion.
stevlor
Bongonaut
Posts: 58
Joined: Mon Apr 11, 2016 9:33 am
Location: Leeds, UK

Re: Rear Speaker Wiring

Post by stevlor » Tue Oct 04, 2016 4:46 pm

Thanks, unfortunately I can't see anything like that - so I'm guessing that installing rear speakers would involve a slightly bigger job!
Post Reply

Return to “Techie Stuff”