Haydn Alarm LCD Bulb Change

[Mark Elvin]

Is is possible to change the bulb on the display an the LCD display? I'm a fussy bugger & it doesn't match the colour of the dash illumination.

[mikeonb4c]

Is is possible to change the bulb on the display an the LCD display? I'm a fussy bugger & it doesn't match the colour of the dash illumination.

But....but.....but....the only time it's on is when you are likely to have other things on your mind?

Sorry, that's not an answer! It'll be interesting to see what the lca people say - so long since I fitted mine I can't remember.

[Simon Jones]

Most LCDs use surface mounted LEDs fixed to the PCB so changeable but only if you are experienced in working with s/m components.

[Mark Elvin]

Most LCDs use surface mounted LEDs fixed to the PCB so changeable but only if you are experienced in working with s/m components.

Good job we have a decent electronics manufacturing department!!!!

[haydn callow]

Are you talking about a Low Coolant Alarm or a TM2 temp alarm??

[Mark Elvin]

TM2 COMBINATION

[haydn callow]

You could take the lid off and change the LCA alarm bulb if you can solder. Don't try and interfere with the TM2 bulb....but what's the point? It's only on for 1 sec when you switch on, any other time and you will spot the red amongst all your other lights.
Best advice...leave well alone.

[Mark Elvin]

tHE LCD ILLUMINATION IS WHITE ALSO.

[haydn callow]

You cannot change the LCD

[Mark Elvin]

It's the illumination of the LCD I want to change. Not the warning light or LCD itself.

[haydn callow]

Carnt be done