It seems they just need to be pulled downward. I unscrewed the bolt securing the fixing bracket in order to find out.

Hi All - probably obvious to many but how do you release the flasher unit from its mounting bracket ? I've got a problem with no feed to my rear drivers indicator and trying to trace the fault. Cheers Jim

Best I've done on a long run is 24mpg. Round town I get 19mpg on average.

Thanks both AVA Leisure are sourcing the collar for me. Cheers Jim

Does anyone have any images of the rear wheel bearing kits ? I wanted one ASAP so got one delivered to my local motor factors within the hour. The garage advised I needed a seals kit as the bearing kit didn't have one and so I got one next day delivery from a well known bongo parts supplier. The ...

I dont carry the big metal pole thingy that comes with the musroom roof option. I stand on the slidingdoor step and push up. I am just shy of 6' but must admit it seems to be getting harder to lift (struts in need of regassing ?).

My method is to tie a climbing cord to the eyelet and again stand ...

Thanks Simon

I'll bear that in mind.

All the best

Jim

For the first time in 4 years of Bongo ownership I've finally got round to seriously considering having my aircon checked out and re-gassed. It has a JAL rear conversion so no rear heater controls etc. I bypassed the rear heater matrix following a leak at the matrix last year but have never touched ...

no I've definitely not caused any structural damage just cosmetic - I had a local body shop quote £300 but they also suggested I get any old silver paint and spray it in which I took to mean they basically didn't want the job

A few weeks ago I managed to break my rear light cluster and gouge the corner of the rear bumper. Having tried to prep, prime and spray, the results spoke for themselves and I was reminded that I am useless at spraying and so I've been making enquiries to have it professionally sprayed by someone ...

Hi, does anyone know where I might get replacement rear brake caliper bolts and also nuts and bolts for the rear drop links some of mine have been rounded off.

Cheers Jim

Done now and working as it should - thanks again

Thanks Simon I ran ignition feed from the radio up the passenger side A pillar and should have done the same with the permanent feed from the radio at the same time

Sorry to (re)hijack this thread but can anyone advise where on the light fitting I should take the permanent +VE feed to avoid resetting/switching off the clock every time a door is opened. Also can i take ground from the light fitting or do I need a "permanent" ground off the chassis somewhere ?

Thanks for the tips gents - got it free just need to find some time to do the job now