Hi Guys

Just had my auto box replaced and have found that the reversing beeper and reversing lights no longer work. I would think that we should be looking at one the cables/sockets on the new gearbox for the switch but what one should we be looking at. Anyone with any photos of the switch cable or ...

Hi

I have a 12v Meos tv with dv player and usb. I have mine mounted on the ceiling between the drivers and passenger seats on a pull down bracket. It gets pushed up while driving and is held up with a Velcro strap across it. The power is controlled bra switch on the control panel in the rear beside ...

I am currently sourcing a second hand gearbox for my 2.5 4x4 auto and have been asked to give them the ID number off a plate on the gearbox. But I can't find it. Can anyone help me with photos if poss as to where I will find this plate?

My tail lights and facia lights are all working fine so I don't think it is the stalk switch and surely none of them would work if the relay was playing up?

Any ideas guys what my issue might be. Turn the stalk to turn on side lights tail light comes on, facia lights all come on but no front side lights??

Hi guys

Just noticed I have no sidelights in either side. Turning the lights to side lights turns on the dashboard lights but that's all. Can't find if there is fuse specific to side lights. Anybody got any ideas what to start looking at next?

Bongo 2.5 4x4 1997

G

Replacement box came all intact with TC attached the guys said it was the easiest replacement they have ever done. Lots of room to get to everything and all the bolts came off really easy

Well guys that's the gearbox swapped out and second hand one in. Got it off BongoSpares excellent delivery times and the guys at work are saying it was in very good condition. They managed to (2 guys working on it) swap the old one out and new one in in 1hr 40mins. They were quite pleased with the ...

Hi Guys

The mechanics at work are going to swap out my old broken auto box and replace it with a nice shiny second hand one in the next couple of days . They were wanting to know before they got started if the torque converter lifts out at the same time as the box or is removed separately??

G

So guys just replacd the auto gearbox oil and disconnected two wires on the SpeedM8 conversion chip one that was on the blue/white wire to speedo and also a connection to the green/red wire on the rear. So took it out a run and still the same issue. Ch ages fine every time 1st to second and goes ...

Hi

Not sure about the conversion but the speedo has had the K part of the KP/H replaced by M/H. Where would the inline chip be located if this was the case?

G

Hi guys

Was away for the weekend in the bongo and began getting a few gear change issues which got worse today on the way home.

On the way up I would describe it as feeling like a slipping clutch. Changed fine from first to second then into third. When you pushed the throttle a little o accelerate ...

Does anyone know what size/type screws I will need to the replace the 8 screws on the fuel tank access plate?

Hi

I have a 2.5 Diesel engine. Yeah changed the fuel filter then cleaned the banjo filter, connected a hose to the fuel in end of the filter and blow into the tank. Gave a pop as the crap got blown out and seemed fine for a couple of days then symptoms returned. Blew back down the fuel line and ...

Hi Guys

Having some fuelling issues and after some filter changes we think that the problem may be a clogged fuel pickup strainer. I have got to the tank access hatch but am not sure if I have to remove the plate with all the connections/pipes on to get to the strainer or whether the round tank ...