Air Con regas

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Glynanderson

Air Con regas

Post by Glynanderson » Wed Apr 25, 2007 10:23 am

Hi,
Anyone know the whereabouts of the Air con recharge low pressure side ports.
Also, are there separate ones for front and rear systems?
Cheers,
Glyn
Glynanderson

Post by Glynanderson » Wed Apr 25, 2007 10:28 am

OK, I think I can answer it myself using this diag.
http://www.lushprojects.com/bongoparts/ ... of02).html

But, does anyone know the type of refrigerant used in a '97?
Veg_Ian

Post by Veg_Ian » Wed Apr 25, 2007 11:02 am

Nothing in the manual Glyn but I would put money on it being 134a. As I'm about to dismantle mine now, I'll see if there's a sticker under the bonnet.
Veg_Ian

Post by Veg_Ian » Wed Apr 25, 2007 11:08 am

Yep a little sticker on the gizmo near the condensor that says 134a. Mine's a 97 as well.

Ian
paul9

Post by paul9 » Wed Apr 25, 2007 12:58 pm

just been told, wait for it.................................Kwik Fit are doing a full air con service for £44.95,which includes a full vacume and system check and refill,no charge if system i has a leak, but check first,not sure if this is nationwide but is advertised at one in carlisle :wink:
trekie

Post by trekie » Wed Apr 25, 2007 1:05 pm

i saw this advertised at one on the wirral so i assume its a country-wide offer

regards
alex and jan :lol:
smartmonkey

Post by smartmonkey » Wed Apr 25, 2007 1:17 pm

R134a on my 96. I think you had to use this foul rubbish by then. Bring back the good stuff.
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Post by mikeonb4c » Wed Apr 25, 2007 1:23 pm

800 grammes of it from memory. When I enquired of Kwikfit about their scheme back in Nov/Dec 06 they said it had yet to be rolled out beyond the South East (and a little bit up into East Anglia too I think). May have changed now.
Glynanderson

Post by Glynanderson » Wed Apr 25, 2007 4:14 pm

Thanks for replies, I'll give Kwik Fit a ring!
paul9

Post by paul9 » Wed Apr 25, 2007 9:48 pm

don't let them talk you into anything else you don't need,if in doubt always get a second opinion before trusting these guys,take a brown holdal of some sort and keep it under your arm,they will think you have a hidden camera and they are being filmed by undercover reporters :wink:
Veg_Ian

Post by Veg_Ian » Thu Apr 26, 2007 7:49 pm

...and keep a baseball bat in the bag for when they screw up your Bongo

kidding, kidding I didn't really mean that I'm sure they employ very competent people at their outlets (well one or two).
paul9

Post by paul9 » Thu Apr 26, 2007 8:29 pm

seems to be a nationwide service,had a few good reports on the estima forum,they won't charge if they can't complete work,because of leaks ect, but i did ask them when i rang Wigan Branch did they know how much to put in a bongo? ,they weren't sure without checking their data,so may be aswell to tell them yourselves,think it is 700g for single system and 1150g for double,but maybe someone can clarify this :wink:
Veg_Ian

Post by Veg_Ian » Fri Apr 27, 2007 7:30 am

That's a very good point Paul and not just for Kwikfit outlets. Most garages/aircon mechs have a huge chart showing vehicles and gas charge weights but of course they won't include import details. If they don't know they will make a guess and probably don't realise you have a twin-zone aircon system so may not put enough gas in. So in order to not get short-changed it's a good idea to quote the weight of gas needed. Anyone able to confirm Paul's figures?
User avatar
dandywarhol
Supreme Being
Posts: 5446
Joined: Mon Dec 19, 2005 10:18 pm
Location: Edinburgh

Post by dandywarhol » Fri Apr 27, 2007 8:18 am

As Mike said - 800 grams for a Bongo
Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
RobinS

Post by RobinS » Fri Apr 27, 2007 8:31 am

The amounts are on the members factsheet - but since they have already been posted here anyway, the factsheet says 700g for front only, 1150g for the dual system. My garage were going to re-gas mine at the last service, but those figures were not available to them anywhere, so I looked them up ready for next time. Does seem that if you go to Kwik Fit you'll need to tell them how much, or maybe they'll just guess, and from what I've been told too much can damage the system.
Locked

Return to “Techie Stuff”