Hold flashing and error with diagnostic port

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Bongold
Bongonaut
Posts: 32
Joined: Sat Jun 03, 2017 3:39 pm
Location: Cardiff

Re: Hold flashing and error with diagnostic port

Post by Bongold » Sat Sep 18, 2021 1:31 pm

I have disconnected both negative terminals on the SB and LB, held the brake for 10+ seconds, reconnected, started and idled for a couple of minutes. The errors are still showing on the led and hold light on the dash. Do you need to have the jumper and led wires disconnected to do the error reset?
Top
User avatar
g8dhe
Supreme Being
Posts: 10701
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.

Re: Hold flashing and error with diagnostic port

Post by g8dhe » Sat Sep 18, 2021 2:13 pm

No as far as I know the error codes stay until the problem is resolved, then they will reset themselves as it were.
Geoff
2001 Aero V6, AFT, full side conversion.
Top
User avatar
rongo
Junior Bongonaut
Posts: 17
Joined: Tue Jun 06, 2017 1:21 am
Location: Still trying to find it

Re: Hold flashing and error with diagnostic port

Post by rongo » Sat Sep 18, 2021 8:42 pm

it was me that blew the engine fuse that powers the diagnostic socket :D :D
LDON SE
BONGO 2.5TD auto 4WD 1996
SGL5
« Je ne sais qu'une chose, c'est que je ne sais rien. »
Top
Post Reply

Return to “Techie Stuff”