Atf fluid removal

[Timandclaire]

I intend to change my atf fluid and would like to do a thorough job

My question is what is the best method to ensure i get all of the fluid out specifically from the torque converter?

I understand i can pump fluid out via the dip stick and drop the sump ..however i'm unsure if doing it this way would clear the torque converter.

Many thanks Tim

[g8dhe]

Not sure you ever can drain it completely see viewtopic.php?p=683745#p683745

[Roy748]

Hello.
I drained mine, well as best I could through removal of the sump, therefore allowing me to clean the filter too. I refilled it with around 4 litre. I appreciate I could not fully drain it all, but after 200 miles drained it again only this time using a electric pump via the filler tube, topping up with just over 3 litres. The combined efforts have gone a long way to changing most of the aft oil.
Hope that helps.