What size 12 point socket for head bolts?

frinkemon · Post by **frinkemon** » Mon Jan 22, 2018 12:01 am

Hey All,

I'm replacing the head as mine had most likely succumbed to something or other.. Just want to buy a 12 point socket, anybody know what size?

Thanks,
Leigh

Post by **Bob** » Mon Jan 22, 2018 12:15 am

Which engine have you got?

I'm guessing not the V6 as you say 'head'.

cutlass · Post by **cutlass** » Mon Jan 22, 2018 9:07 am

on diesel 14- after turning the corner -check torque moment - "thin" apr 90 Nm, "fat" -apr 130 Nm

teenmal · Post by **teenmal** » Mon Jan 22, 2018 1:33 pm

I posted this a few years ago, here it is again.

http://www.manualesdemecanica.com/image ... 6cf9ca.pdf

Take care

cutlass · Post by **cutlass** » Mon Jan 22, 2018 3:03 pm

"where did you get these figures from as the ranger manual I have says 29nm then 90deg. and then another 90deg" - I turn bolt and look what crushd before - my old head, my old block or bolt.....and ask any people - check torque too....it dont "techinfo" from manual book - it only experienced

What size 12 point socket for head bolts?

What size 12 point socket for head bolts?

Re: What size 12 point socket for head bolts?

Re: What size 12 point socket for head bolts?

Re: What size 12 point socket for head bolts?

Re: What size 12 point socket for head bolts?