brake pipes

davepickering · Post by **davepickering** » Tue Nov 22, 2016 2:11 pm

hi still waiting for the 23mm socket no one seems to have one in stock...

also flexi pipe not listed so will use any pipe that's the same size and shape and get metal pipe made up to match the ends seems like the best option. Imagine that's the best option for any job on the bongo have tried the nut extractors mentioned before to no avail so think I might be cutting 14mm bolt that fits through back plate drill out and fit new nut and bolt didn't realise it would be this much bother to get a bearing changed

rita · Post by **rita** » Tue Nov 22, 2016 2:56 pm

Do you have or have access to a hydraulic press.?

Try ebay for brake hoses or here ...

http://mazdabongo.com/product-category/ ... omponents/

davepickering · Post by **davepickering** » Tue Nov 22, 2016 5:01 pm

rita wrote:Do you have or have access to a hydraulic press.?

Try ebay for brake hoses or here ...

http://mazdabongo.com/product-category/ ... omponents/

thanks Rita have put link in my Favorites first place I have seen with the part cant find any on ebay
and there is an engineering company not far from me will phone and see if they have a press

winchman · Post by **winchman** » Tue Nov 29, 2016 9:45 pm

Any update?

davepickering · Post by **davepickering** » Wed Nov 30, 2016 9:29 pm

no update winchman

mum passed away Saturday all work stopped for now

winchman · Post by **winchman** » Wed Nov 30, 2016 9:31 pm

Sorry to hear that.

Post by **Bob** » Wed Nov 30, 2016 10:45 pm

Realy sorry to hear such sad news.

Condolences from me and Su at this difficult time.

davepickering · Post by **davepickering** » Wed Nov 30, 2016 11:12 pm

winchman wrote:Sorry to hear that.

thanks winchman

davepickering · Post by **davepickering** » Wed Nov 30, 2016 11:13 pm

Bob wrote:Realy sorry to hear such sad news.

Condolences from me and Su at this difficult time.

thanks bob and sue

davepickering · Post by **davepickering** » Mon Feb 13, 2017 5:43 pm

hi

all back at it now managed to remove brake pipe (well the remains) looks like flexi pipe ok all I have to do now is find some one who can press off old wheel bearing and press on new one

so I can refit half shaft then I can start rebuilding and fit new brake pipe etc;

winchman · Post by **winchman** » Mon Feb 13, 2017 6:30 pm

I am sure a local garage will do it I used to pay £10 but now have my own press

davepickering · Post by **davepickering** » Mon Feb 13, 2017 6:56 pm

Hi, winchman tried the local engineering comp this afternoon and they said they can't do it without destroying the back plate ? I used to use them for heads and converting old cars to unleaded etc; back in the 70s & 80s (when I used to customise cars) was surprised when they said can't do it

winchman · Post by **winchman** » Mon Feb 13, 2017 7:10 pm

Is the bearing on a shaft?

davepickering · Post by **davepickering** » Mon Feb 13, 2017 7:29 pm

yes its on rear half shaft

davepickering · Post by **davepickering** » Mon Feb 13, 2017 7:39 pm

davepickering wrote:yes its on rear half shaft

did I not mention it

brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes

Re: brake pipes