What Screws to use on Bulkhead

[cuchillo]

Hello,

I wish to mount a bus bar onto the bulkhead under the bonnet. What screws can/should I use? I assume that its OK as the VSR has been screwed onto the bulkhead already.

Many thanks

Cuch

[wonkanoby]

any self tapper,trick is to be sure you dont drill or screw into any thing behind it

[Bob]

Agree, likely No 6 or 8, pan head, slotted or pozi, and long enough that 3 threads go through the bulkhead, but as said, not into anything behind the hole.

[haydn callow]

Use Stainless if you have any.