Turbo
Moderators: Doone, westonwarrior
-
- Bongonaut
- Posts: 55
- Joined: Sun Jul 20, 2014 8:39 am
- Location: Highlands Scotland
Turbo
When the old turbo was taken out of bongo, turbo was so knackered that it was not only using oil or allowing it to leak out, it had got oil in the intercooler. It is being left overnight to drain. Should I really put a new one on?
-
- Bongonaut
- Posts: 55
- Joined: Sun Jul 20, 2014 8:39 am
- Location: Highlands Scotland
Re: Turbo
Yes I have got a reconned turbo to be fitted. Oil got into intercooler. Draining over night. Point was do I need to get a new intercooler.
Re: Turbo
I can't see you need to replace the intercooler, but I'm sure someone more techie will help.
-
- Bongonaut
- Posts: 55
- Joined: Sun Jul 20, 2014 8:39 am
- Location: Highlands Scotland
Re: Turbo
Thank you. Just wondered with it being full of oil, if draining would be enough.
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Turbo
They tend to get quite gunged up with oil anyway. If it were me, I would drain the worst out and then flush the rest out with a degreaser such as Gunk. It will be nearly impossible to buy a new Mazda one so your only option is to buy a used one which could be in a similar condition to yours.
-
- Bongonaut
- Posts: 55
- Joined: Sun Jul 20, 2014 8:39 am
- Location: Highlands Scotland
Re: Turbo
Thanks for this information, understand totally what your saying. Feel reassured
- Northern Bongolow
- Supreme Being
- Posts: 7722
- Joined: Mon Mar 15, 2010 11:33 pm
- Location: AKA Vanessa
Re: Turbo
theres a 3 inch black plastic pipe that goes round the back of the head round before the turbo, has that got oil in, if it has then the valve stem seals could be worn, or rings worn or the egr valve stuc.
-
- Bongonaut
- Posts: 55
- Joined: Sun Jul 20, 2014 8:39 am
- Location: Highlands Scotland
Re: Turbo

Re: Turbo
I'm trained Peugeot tech,many many times turbo failure jobs brought in ,norm was to wash out inter cooler and trunking with petrol flush out and leave to dry never had any probs,
Inho I personnally would not renew cooler
Hope this is of help
Inho I personnally would not renew cooler
Hope this is of help
-
- Bongonaut
- Posts: 55
- Joined: Sun Jul 20, 2014 8:39 am
- Location: Highlands Scotland
Re: Turbo
Thanks for that information, very helpful. Just wanted to check these things before everything was rebuilt. Appreciate your comments. 
