Hi
My current problems (excuse the pun) are that the electric rear blinds (both sides) and the roof work only when they feel urge. I had a problem with the diesel gauge earth as well but have now fixed that (touch wood).
Are they related? Or, is it just a coincidence?
Has anyone else had similar problems and fixed them?
If there are some earth points, straps or troublesome connectors that often need a good clean let me know where they are and I'll attack them with a copper brush and some WD40.
Thanks in advance.
Martin
Roof and blinds work when they feel like it - bad earth?
Moderators: Doone, westonwarrior
-
- Apprentice Bongonaut
- Posts: 9
- Joined: Sun Jan 05, 2014 12:37 am
- mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
- Contact:
Re: Roof and blinds work when they feel like it - bad earth?
Probably unrelated, except by age. That was my experience anyway. New earth strap fixed gauge. Electrical contact spray may fix blinds (switches get iffy), and two expensive new motors eventually fixed my roof!
Re: Roof and blinds work when they feel like it - bad earth?
For the blinds try operating the front switches several times, they rarely get used and oxidise up till insufficient current.
Likewise check the Handbrake switch (does the brake light operate ?) before opening the AFT.
Likewise check the Handbrake switch (does the brake light operate ?) before opening the AFT.
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
- mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
- Contact:
Re: Roof and blinds work when they feel like it - bad earth?
Excellent advice as usual. I use my blinds most days when I park up at work largely for the reason Geoff mentions. I should do likewise with the roof. Use it or lose it I think with electrics I think.g8dhe wrote:For the blinds try operating the front switches several times, they rarely get used and oxidise up till insufficient current.
Likewise check the Handbrake switch (does the brake light operate ?) before opening the AFT.