ignition barrel

[kpautos]

hi everyone just a quick question,
can the ignition barrel be removed by turning the key to say position two and pressing a button on the side, i cant seem to get this one to play ball but it may not come apart like that if you know what i mean.
sorry if its elswhere on the forum allready
thanks, kirk

[Gasy]

I've no idea

But there's a guy on here who can cut keys and make new ignition barrels from just the number on your original key

Give him a PM

Name on here is hypno211
Or tom

Does a good job I had him cut a new key works fine
Had been back and forwards to local key cutters trying to get there's to work never did.

[jimmo62]

the workshop manual for the 2.5TD says you have to remove the whole key cylinder set by making a groove in the head of the shear bolt with a chisel and then unscrew the bolt to remove the key cylinder. To replace you need a new shear bolt.

[kpautos]

yes there are two shear bolts so its looking like the whole unit has to be changed, thanks for your replies, regards, kirk

[kpautos]

all done, thanks for your help