enging not starting

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
matt whu
Apprentice Bongonaut
Posts: 5
Joined: Thu Jun 27, 2013 5:31 pm

enging not starting

Post by matt whu » Sat Jun 29, 2013 10:16 pm

help just changed fuel filter re started engine ran for a while then stopped. took filter off again no fuel in filter any ideas :?:
User avatar
haydn callow
Supreme Being
Posts: 5777
Joined: Mon Jan 08, 2007 9:50 pm
Location: Somerset
Contact:

Re: enging not starting

Post by haydn callow » Sat Jun 29, 2013 10:33 pm

Did you fill the new filter with fuel before fitting?
http://www.coolantalarm.co.uk
Developer of the Mazda Bongo Coolant loss Alarm
Also BMW Clocks
User avatar
Driver+Passengers
Supreme Being
Posts: 2019
Joined: Mon Mar 14, 2011 1:56 pm
Location: Fife

Re: enging not starting

Post by Driver+Passengers » Sat Jun 29, 2013 10:56 pm

If your fuel filter body does not have a primer pump on the top (lots don't), then it can take a full minute or more of cranking to start with a dry filter. Filling with fuel first should reduce the time.
Image Image
What she doesn't know won't hurt me.
matt whu
Apprentice Bongonaut
Posts: 5
Joined: Thu Jun 27, 2013 5:31 pm

Re: enging not starting

Post by matt whu » Sat Jun 29, 2013 11:00 pm

haydn callow wrote:Did you fill the new filter with fuel before fitting?
no ,have change filter many times befor and never filled with fuel befor
User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: enging not starting

Post by Simon Jones » Sat Jun 29, 2013 11:23 pm

Diesel or petrol? If the former, keep spinning it over on the starter and assuming you don't have a leak around the filter seal, it should eventually start. If petrol, turn ignition on and off a few times to allow the fuel pump to repressurise the fuel lines.
matt whu
Apprentice Bongonaut
Posts: 5
Joined: Thu Jun 27, 2013 5:31 pm

Re: enging not starting

Post by matt whu » Sun Jun 30, 2013 12:58 pm

Simon Jones wrote:Diesel or petrol? If the former, keep spinning it over on the starter and assuming you don't have a leak around the filter seal, it should eventually start. If petrol, turn ignition on and off a few times to allow the fuel pump to repressurise the fuel lines.
put disel in filter now runs should have known better
User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: enging not starting

Post by Simon Jones » Sun Jun 30, 2013 6:49 pm

I guess you have a diesel engine then :wink:. Glad it's all sorted now. For next time, fill the empty filter with some injector cleaner to give the system a good clean out when it starts up.
Locked

Return to “Techie Stuff”