front bullbar fitting
Moderator: Ian
front bullbar fitting
hi friends, just purchased a front bull bar with spots, sump plate etc and im reassured that it will have all the bolts and fixings when it arrives. but i could do with some advice on wether its hard to fit or any tips on how to fit it please. bit of a semi novice diy er but prepared to have a go. thanks.
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
- Contact:
Re: front bullbar fitting
Bar and guard very easy to fit, make sure you get the bottom brackets included. Spots will obviously need you to understand how to wire them up.
Re: front bullbar fitting
mikeonb4c wrote:Bar and guard very easy to fit, make sure you get the bottom brackets included. Spots will obviously need you to understand how to wire them up.
thanks for that. All seems pretty straight forward then
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
- Contact:
Re: front bullbar fitting
Yes its easy to see what bolts go in where when you offer the parts up to the body (oooh matron) as long as yer nuts are obliging and not rusted onjunior wrote:mikeonb4c wrote:Bar and guard very easy to fit, make sure you get the bottom brackets included. Spots will obviously need you to understand how to wire them up.
thanks for that. All seems pretty straight forward then
