pre 99 seatbelt light

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
adamhardwidge

pre 99 seatbelt light

Post by adamhardwidge » Wed Sep 05, 2012 7:56 pm

Hi everyone is there a seat belt light on the 1995 model mazda bongo, i see there is wires going to the seat belt socket on the drivers side and they plug into a loom under the center console, but i have no lit light on the dash board, is it because the bulb is missing maybe?
User avatar
g8dhe
Supreme Being
Posts: 10760
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.

Re: pre 99 seatbelt light

Post by g8dhe » Wed Sep 05, 2012 8:07 pm

Yes see here
Its only for the Drivers side however....
Geoff
2001 Aero V6, AFT, full side conversion.
User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: pre 99 seatbelt light

Post by Simon Jones » Wed Sep 05, 2012 8:18 pm

The light should come on briefly when you first turn the key. I know warning lights are now part of the MOT, although not sure if the seatbelt one is included.
New Forest Terrier
Supreme Being
Posts: 1442
Joined: Mon Aug 18, 2008 10:50 pm
Location: New Forest

Re: pre 99 seatbelt light

Post by New Forest Terrier » Wed Sep 05, 2012 11:07 pm

My 95 has no working seat belt light either. It has never worked and it took me three years to realise it should have one. Never had any MOT problems and unless you crawl under the seat to find the plug and wiring there is no evidence it should have a light.

The previous owner seems to have thoroughly disabled it, so if there is ever a MOT problem I will remove the visible wiring. Never worried by its absence. Putting on belt while in car is automatic.
The BewilderBeast - V6 Mean Green Tintop with LPG and 321 Away Montague Conversion
jaylee
Supreme Being
Posts: 5500
Joined: Wed Mar 05, 2008 4:56 pm
Location: AQVAE SVLIS

Re: pre 99 seatbelt light

Post by jaylee » Thu Sep 06, 2012 12:17 am

OK, i've looked into this one on my vehicle.... But never got round/keep forgetting/need to get a "special screwdriver to sort it... :roll:

In the part 57-900A the wire on mine is broke just up inside the seatbelt latch & with a jiggle back & forth mine works... But not always... http://lushprojects.com/bongopartsmk2/c ... 2of03.html

I need to open the housing to the belt latch on mine to fix the wire... But these are special screw heads that hold it together... I believe this could be a common place stress is caused on the wire/loom...?!! :idea: :arrow:
Cheaper by comparison to a race horse...
Image
Locked

Return to “Techie Stuff”