pre 99 seatbelt light
Moderators: Doone, westonwarrior
pre 99 seatbelt light
Hi everyone is there a seat belt light on the 1995 model mazda bongo, i see there is wires going to the seat belt socket on the drivers side and they plug into a loom under the center console, but i have no lit light on the dash board, is it because the bulb is missing maybe?
Re: pre 99 seatbelt light
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: pre 99 seatbelt light
The light should come on briefly when you first turn the key. I know warning lights are now part of the MOT, although not sure if the seatbelt one is included.
-
- Supreme Being
- Posts: 1442
- Joined: Mon Aug 18, 2008 10:50 pm
- Location: New Forest
Re: pre 99 seatbelt light
My 95 has no working seat belt light either. It has never worked and it took me three years to realise it should have one. Never had any MOT problems and unless you crawl under the seat to find the plug and wiring there is no evidence it should have a light.
The previous owner seems to have thoroughly disabled it, so if there is ever a MOT problem I will remove the visible wiring. Never worried by its absence. Putting on belt while in car is automatic.
The previous owner seems to have thoroughly disabled it, so if there is ever a MOT problem I will remove the visible wiring. Never worried by its absence. Putting on belt while in car is automatic.
The BewilderBeast - V6 Mean Green Tintop with LPG and 321 Away Montague Conversion
Re: pre 99 seatbelt light
OK, i've looked into this one on my vehicle.... But never got round/keep forgetting/need to get a "special screwdriver to sort it...
In the part 57-900A the wire on mine is broke just up inside the seatbelt latch & with a jiggle back & forth mine works... But not always... http://lushprojects.com/bongopartsmk2/c ... 2of03.html
I need to open the housing to the belt latch on mine to fix the wire... But these are special screw heads that hold it together... I believe this could be a common place stress is caused on the wire/loom...?!!


In the part 57-900A the wire on mine is broke just up inside the seatbelt latch & with a jiggle back & forth mine works... But not always... http://lushprojects.com/bongopartsmk2/c ... 2of03.html
I need to open the housing to the belt latch on mine to fix the wire... But these are special screw heads that hold it together... I believe this could be a common place stress is caused on the wire/loom...?!!


Cheaper by comparison to a race horse...

