Exhausts
Moderators: Doone, westonwarrior
- PisceanJoy
- Bongolier
- Posts: 457
- Joined: Fri May 29, 2009 5:16 pm
- Location: Wells Somerest
- Contact:
Exhausts
The back of my exhaust has just fallen off
Haas anyone bought one recently and know how much they are
Have seen how much it is in bongo shop
Haas anyone bought one recently and know how much they are
Have seen how much it is in bongo shop
-
- Supreme Being
- Posts: 11354
- Joined: Mon Dec 18, 2006 6:15 pm
- Location: Norwich
Re: Exhausts
Fit a straight pipe instead - cheaper, better and fitted by loads of members 

John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
- PisceanJoy
- Bongolier
- Posts: 457
- Joined: Fri May 29, 2009 5:16 pm
- Location: Wells Somerest
- Contact:
Re: Exhausts
without the back bit?
I have a Diesel bongo
Has anyone near me done this?
I have a Diesel bongo
Has anyone near me done this?
Re: Exhausts
PisceanJoy wrote:without the back bit?
I have a Diesel bongo
Has anyone near me done this?
Hi,I believe that a Ford Connect tailpipe will fit with a bit of fiddling.
Just remember that removing any major part of an exhaust system is a MOT failure,but I think you would need a switched ON Tester to spot it on these vehicles.
Cheers.
-
- Supreme Being
- Posts: 11354
- Joined: Mon Dec 18, 2006 6:15 pm
- Location: Norwich
Re: Exhausts
Not unless the rules have changed recently. Providing there are no leaks and it isn't too noisy, it will pass an MOT.teenmal wrote:Just remember that removing any major part of an exhaust system is a MOT failure,
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
- Muzorewa
- Supreme Being
- Posts: 5250
- Joined: Wed Sep 19, 2007 6:00 pm
- Location: Team Muz HQ, Outer Bongolia
- Contact:
Re: Exhausts
...and it can't be any noisier than ours from MIJ in Walsall 
PS - who I would wholeheartedly recommend

PS - who I would wholeheartedly recommend


Re: Exhausts
As I've said before the standard "oil drum" is a waste of space and weight.
If you have a decent local garage or exhaust fitter ask them to source and fit a small straight through box - it's all you need.
If you have a decent local garage or exhaust fitter ask them to source and fit a small straight through box - it's all you need.
Re: Exhausts
£47.50 from A TO Z AUTOPARTS (MIDLANDS)LTD. I just fitted mine today.
- PisceanJoy
- Bongolier
- Posts: 457
- Joined: Fri May 29, 2009 5:16 pm
- Location: Wells Somerest
- Contact:
Re: Exhausts
Thanks
- PisceanJoy
- Bongolier
- Posts: 457
- Joined: Fri May 29, 2009 5:16 pm
- Location: Wells Somerest
- Contact:
Re: Exhausts
Have you got a URL / contact no for them google serach doesnt find itAethelric wrote:£47.50 from A TO Z AUTOPARTS (MIDLANDS)LTD. I just fitted mine today.

- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Exhausts
Lots of results on google including this with contact details;
http://www.yell.com/b/A+to+Z+Autoparts- ... index.html
http://www.yell.com/b/A+to+Z+Autoparts- ... index.html
Re: Exhausts
Hi,you could try these people,they have sold quite a lot.
http://www.ebay.co.uk/itm/MAZDA-BONGO-1 ... 1c1a40a62c
http://www.ebay.co.uk/itm/MAZDA-BONGO-1 ... 1c1a40a62c
- mikeWalsall
- Supreme Being
- Posts: 3075
- Joined: Thu Sep 01, 2011 7:11 pm
- Location: Walsall West Midlands
Re: Exhausts
JAL Mushroom roof,12/240v, fridge, cooker, sink, LPG V6 .. (written off @ £5500 Nov 2016)
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Exhausts
Worth noting there are two types of exhaust systems. The most recent link from Mike is the 4 part version for vans with the winter warm up valve fitted, but there are probably more Bongos out there with the 3 part version. While the backboxes will probably be the same in both cases, the front section is not interchangeable. If the front section is in good nick, then I personally would just replace the broken bit.