replacement wheels

Gmac · Post by **Gmac** » Tue Nov 22, 2011 10:09 pm

Can anyone suggest alternative alloy wheels to fit to my bongo to replace a buckled one... I've been told that Ford Mondeo wheels are fine..

kloonsy · Post by **kloonsy** » Tue Nov 22, 2011 10:23 pm

Gmac wrote:Can anyone suggest alternative alloy wheels to fit to my bongo to replace a buckled one... I've been told that Ford Mondeo wheels are fine..

Mondeo no good. Are they steel? or alloy? If steel, plenty of bongo's getting broken

Dave

Gmac · Post by **Gmac** » Tue Nov 22, 2011 11:17 pm

Alloys Dave, 1 front one buckled so i might have to get whole set, i think it's recommended to have wider tyres on back though..?

Post by **Bob** » Wed Nov 23, 2011 12:27 am

Loads on tyre sizes if you try a search.

Original equipment is wider, but lower aspect ratio, on rear, but the same (larger) size all round is fine.

If its 4wd the same circumference is vital.

And welcome aboard.

Northern Bongolow · Post by **Northern Bongolow** » Wed Nov 23, 2011 1:24 am

hyundai tuscan 16 inch but correct fitting.

mister munkey · Post by **mister munkey** » Wed Nov 23, 2011 1:25 am

I have a set of 4 good condition 15" Mazda alloys fitted with four new tyres up for grabs.

PM me if you're interested.

steveyd · Post by **steveyd** » Wed Nov 23, 2011 12:30 pm

I put a set of Mitsubishi Outlander 16" Alloys on mine - no spigot rings needed and perfect fit. If you are going from steels, you'll need new wheel bolts with a shim on - Toyota ones are fine.

cheers,

Steve

Gmac · Post by **Gmac** » Wed Nov 23, 2011 3:16 pm

I've just found out that I need wheels to fit Tyres that are 215/65 15..

replacement wheels

replacement wheels

Re: replacement wheels

Re: replacement wheels

Re: replacement wheels

Re: replacement wheels

Re: replacement wheels

Re: replacement wheels

Re: replacement wheels