Got new exhaust system,glow plugs,air/oil filter,oil all done.
Disc n pads next week and the bongo be good for plenty more miles.
The drivers window switch packed up this afternoon,:( so if anyone got
a working one going for sale drop us a pm.
Cheers Paul
Parts fitted
Moderators: Doone, westonwarrior
-
- Supreme Being
- Posts: 1913
- Joined: Wed Sep 01, 2010 9:24 pm
- Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.
Re: Parts fitted
bawgixer wrote:Got new exhaust system,glow plugs,air/oil filter,oil all done.
Disc n pads next week and the bongo be good for plenty more miles.
The drivers window switch packed up this afternoon,:( so if anyone got
a working one going for sale drop us a pm.
Cheers Paul
Great work there paul you can't beat a pre winter splurge, Whats wrong with the switch ( you haven't pressed the lock button for the passenger window have ya )

- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: Parts fitted
Have you checked it's not the wiring loom between the drivers door & the body that's the problem with the window switch- usually is.
You can't polish a turd - but you can roll it in glitter.
Re: Parts fitted
Lots of clicking noises from the switch when pressed up or down
-
- Supreme Being
- Posts: 1913
- Joined: Wed Sep 01, 2010 9:24 pm
- Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.
Re: Parts fitted
could it be a relay or even motor then ?bawgixer wrote:Lots of clicking noises from the switch when pressed up or down
Re: Parts fitted
The noise comes from inside the switch box .have removed it from the door card and if u hold it to your ear you can hear the clicks
Re: Parts fitted
Bit later than planned,but that the new disc and pads all round on today.
Front drop links also done if that sounds right
Front drop links also done if that sounds right
Re: Parts fitted
Had exactly the same problem on mine the other week, intermittent electric window operation then a chattering noise when the switch was pressed and now wont work at all, not looked into it yet, but I suspect the wiring as missfixit mentions, mine looks like it has been repaired before (badly) so will be taking a look at it in the next week or so.