Stick On LED Strip Lights

[tonnee]

Hi

Just got a set of those flexible LED driving lights and wandered what is the best double sided tape to use to stick them on the Bongo, dont want them falling off

Cheers

Tony

[philpdr]

I've used the Halfords number plate tape for a few things,seems pretty good.

[daveblueozzie]

Its called body moulding tape, and most car accessory shops sell it in a roll.

[M 80NGO]

Be sure to thoroughly de-grease the area with some thinners / white spirit and dry with a clean cloth / tissue before fitting as this will ensure a good bond between the lights and the bodywork then when its all done get some before n after pics up so we can all revel in your self induced LED heaven

[tonnee]

cheers guys, still undecided where to fit them but will get pics up once done

[stuc]

If you need any ideas, just check out daveblueozzie's ride, led's everywhere its great. I was going to take the kids to Blackpool but i might just ask Dave to drive past my house with his side door open.

[bigdaddycain]

If you need any ideas, just check out daveblueozzie's ride, led's everywhere its great. I was going to take the kids to Blackpool but i might just ask Dave to drive past my house with his side door open.

[lpgimports]

make sure you use 3m moulding tape and make sure its degreased first.

Cheap moulding tapes eveything drops off,

I've been playing with these strip leds this week and have some that you can just cut to length, very cool,

Paul

[Badger inkslinger]

If you need any ideas, just check out daveblueozzie's ride, led's everywhere its great. I was going to take the kids to Blackpool but i might just ask Dave to drive past my house with his side door open.

[David Edwards]

have seen a few vehicle with these now, where do u get em then and I take it they are wired into the side lights.

[tonnee]

Got mine form Ebay for around £1.99 but I have also seen them sold on Amazon as well.

Still not fitted mine but I will be simply connecting them to the sidelights

[David Edwards]

mine arrived this morning, two strips of red and two of white, cheap too, just gotta get some sticky stuff now and wire em in, what is the best to use, number plate tape or is there something else.

[mister munkey]

Wire them into the sidelight circuit, I supergued mine on as the 3M tape gave up pretty quick . . .

[David Edwards]

well I wondered about superglue but thought if they should fail they would be a bugga to remove, will try the tape first I think.

[mentaliss]

Hi

Just got a set of those flexible LED driving lights and wandered what is the best double sided tape to use to stick them on the Bongo, dont want them falling off

Cheers

Tony

Bought my 'daylight lights' from Halfords, peeled back the adhesive protection paper , cleaned the fitting area bodywork with alcohol, pressed them on, wired up to sidelights... job done 40mins.. they been on the vehicle now some 4 months no sign of peeling off... (your lights should have self adhesive backing you should not need any further adhesive tape)