Control panel for lifting roof

[jaylee]

In fact the last Bastille of ergonomic practicality would be to put the sunroof switch where i don't have to grope the ruddy ceiling looking for the switch!

It'd be damn handy with the sun roof on a tintop though...!

I would imagine it would be. Got AFT with unopening sunroof, so feel I am unable to comment further.
Looking forward to pics of your next mod then.

Andrew

Crikey! i thought i'd done enough..?

[hembramacho]

Crikey! i thought i'd done enough..?

I didn't think it was possible to do enough to a Bongo! Keep on going - you know you wanna!

Andrew

[jaylee]

Crikey! i thought i'd done enough..?

I didn't think it was possible to do enough to a Bongo! Keep on going - you know you wanna!

Andrew

I think i've totally re wired mine! I pity the poor beggar that decides to dig around behind the panels trying to work out what i done... Even i don't know what i did!??

[MountainGoat]

If it is the motor that is playing up and not the switches then you should find it here.

Tony

[dandywarhol]

Thats the control unit for it Tony - not the motor(s) - they're on the roof

[Scott]

I wonder if the handbrake switch has been replaced with a dashboard button, maybe the switch packed up and somebody fitted this instead?

[busguy]

Thanks to all.

It looks like the dash fitment was there and then removed as the holes are still there. I checked the handbrake switch as the cyl head had been replaced and doing that work might have knocked a wire off or something. I made sure it was working and also changed the fuse.

It worked, a bit hesitant at first, but went up and down without any hassle once it was on the move. The runners and hinges seemed a bit dry so will attend to that. Thanks again.

John