changing bulbs

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
User avatar
peanutcrusher
Tribal Elder
Posts: 546
Joined: Thu Feb 26, 2009 6:59 pm
Location: Portsmouth

changing bulbs

Post by peanutcrusher » Sun May 10, 2009 7:51 am

how do i get the front internal light out so i can change the bulbs and what type of bulb are they
Bongo now work later !!! :) :)
User avatar
brorabongo
Supreme Being
Posts: 3226
Joined: Wed Jan 17, 2007 5:56 pm
Location: Brora, Sutherland

Re: changing bulbs

Post by brorabongo » Sun May 10, 2009 9:48 am

On ours it's a case of moving the whole fitting to the side, and pull down, then you can get to the plastic clips to release the lens. The Lamp type is w5w capsule, I along with others have used LED's instead of the standard......much brighter now. 8)
ボンゴの激怒 pictures
Run your fingers over my Bongo, and I'll run my Bongo over your fingers!! :twisted:
User avatar
peanutcrusher
Tribal Elder
Posts: 546
Joined: Thu Feb 26, 2009 6:59 pm
Location: Portsmouth

Re: changing bulbs

Post by peanutcrusher » Sun May 10, 2009 10:51 am

does this mean you don't pull the glass out to change the bulb.
Bongo now work later !!! :) :)
User avatar
missfixit70
Supreme Being
Posts: 12431
Joined: Fri Jun 01, 2007 3:53 pm
Location: weymouth

Re: changing bulbs

Post by missfixit70 » Mon May 11, 2009 12:03 am

Pull the whole fitting out.
You can't polish a turd - but you can roll it in glitter.
Locked

Return to “Techie Stuff”