heater not blowing to leg
Moderators: Doone, westonwarrior
heater not blowing to leg
Hi any suggestions on why my heater will only blow air out of dash vents, it wont blow to leg/feet or windscreen?
That'll Be The Day.........
'99 Silver V6 Moonfleet Conversion
'99 Silver V6 Moonfleet Conversion
- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: heater not blowing to leg
Loads of threads on this, seems to be a common problem, check the linkages in the drivers footwell, may be broken or just need clipping back in. Did it ever work? Recently had one that the actuator motor was missing. Have you got slider controls or digital climate control?


You can't polish a turd - but you can roll it in glitter.
Re: heater not blowing to leg
only got her a week ago dont know if it was working on the road up from poole, but its not worked since getting her home, it is the digital one, thanks for the reply will have a look
That'll Be The Day.........
'99 Silver V6 Moonfleet Conversion
'99 Silver V6 Moonfleet Conversion
Re: heater not blowing to leg
Hi had a look and i can turn it onto my legs then onto my dash but using the switch it doesnt work,
at least i can have hot legs now
at least i can have hot legs now

That'll Be The Day.........
'99 Silver V6 Moonfleet Conversion
'99 Silver V6 Moonfleet Conversion
- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: heater not blowing to leg
In the picture above the actuator motor is missing ( posted the wrong piccy
), top right where the connector is with nothing connected to it.
Here is what it should look like

Check you've got the actuator installed & connected properly, if it all appears to be connected in the right places & still not working, check to see if it's getting any voltage coming through when you switch positions.

Here is what it should look like

Check you've got the actuator installed & connected properly, if it all appears to be connected in the right places & still not working, check to see if it's getting any voltage coming through when you switch positions.
You can't polish a turd - but you can roll it in glitter.