Out of interest what part has failed and why ?

There's exhaust gas leaking from the joint of the pipes before the cat, where the down pipes meet


It doesn't just need a new gasket ? https://www.lushprojects.com/bongopartsmk2/code=4000AB&cat=a2ajra0a&vin=&imgno=.html#9
There available it ...

g8dhe wrote: Mon May 12, 2025 8:37 am Out of interest what part has failed and why ?

There's exhaust gas leaking from the joint of the pipes before the cat, where the down pipes meet

You might need to ring a few of the spares places up to find the V6 front exhaust down pipes, rare!
Yes the V6 needs bleeding same as the diesel, unless vacuum filled of course, having said that you don't hear of many coolant bleeding problems with the V6.
https://www.lushprojects.com ...

Hiya guys,
My v6 exhaust is blowing from the twin pipes at the front , does anyone know where i could source a new one please ,I've looked on the websites but cannot see the bit I need .
TIA

Oh , does the v6 coolant need bleeding like the diesel, sorry for the queries, I've only had diesel bongos ...

Gonna be a stupid question but should the glow plug rail be negative?

Second, does anyone have a photo of the wiring connectors on the glow plug relay ,as I'm not sure they are correct

I've popped 2 fuseable link wires already.

Gonna be a stupid question but should the glow plug rail be negative?

Second, does anyone have a photo of the wiring connectors on the glow plug relay.
I've popped 2 fuseable link wires already.

Thanks

Thank you so much , yes my fan is on constantly. I was hoping it was the reason why my bongo wouldn't start.

I was having trouble with starting, it would start OK but soo after it would struggle until it got warm , so I had my glow plugs changed and now it won't run at all

Hi peeps,
I have a problem with a broken connector located on the side of the engine under the glow plug rail.
It looks like plastic and has 2 pins .

I have attached a couple of photos because my description might be vague

Hi , im attempting the replacement of the whole heater box , im got the old one out but struggling to get the replacement in , is there a knack to it

[[]

Thanks for the info , I need to replace the whole unit , part of the lever snapped off the unit

Hi guys , any advice on changing the front heater unit under the dashboard, besides DONT lol, ive heard its a ...... of a job

Hi , I've recently purchased a new radiator and the 4 main hoses , I've also decided to put an inline water temp sensor and gauge , my query is which hose should I put it on , im thinking of the top radiator hose , I already have the low coolant alarm connected, im just being super cautious lol

Hi , does anyone have a wiring diagram for the 2 block connectors that plug into the box , I have a micro switch sensor missing on the passenger front side and one of the wires is too short to join so I'm thinking of disabling the warning buzzer .

Thanks

Thanks Geoff, I'll have a look