nice one...

i got my blade cut at my local independent cobblers.

Hi
Welcome to the forum.

please have a look at this https://igmaynard.co.uk/bongo/forum/viewtopic.php?f=3&t=76085

not genuine mazda , but work great for me, could just use the fob or get the key blade cut at your local lock smiths like i did.
i am well chuffed with mine.

hope this helps

kind ...

glad to help....

Not 100% it was on here now i think about it......

here is what i did....


If you change the battery in the remote central locking fob, you'll need this procedure to re-code the fob.
You can also use this for coding spare or new fobs.

1. All doors closed, but unlocked.
2. Open drivers door ...

Hi

Thought i would share this with you all, sorry if its been covered before.

I purchased a flip key/fob from ebay to upgrade/replace my old remote.

and it works a treat, got the blade cut at my local lock smiths and programmed the fob as per the instructions i found on here.

well chuffed, item ...

Many thanks,
thought it might be something to do with the sliding door.

cheers

Hi
hope some one can help.
I have a 2004 aero city runner , and all the rear windows open apart from the very rear near side one.
the opener on the very rear near side is different to all the others, as in the bit you would pull to open the window is a different shape and slightly behind the trim ...

Fantastic
many thanks bob


cheers

sorry to jump in mid thread... but

Does this all so apply to 2 wheel drive models as well ?

would be nice to run same size all round and get a full size spare.


cheers

Thanks for the help...


will get it all done asap.

many thanks

Excellent info guys , thank you

any tips on flushing the system.

regards

Thank you for your reply and info.

yes winter is coming and i would like to change the coolant, tested it and its only showing protection down to -7 , so not good enough.
my first thought was to drain only a litre of coolant out and add some fresh neat coolant just to bring it up to a better level ...

Hi to all

need some help/advise please

I have looked at many posts about bleeding the coolant system for bongos, but most of them refer to the v6 petrol or the 2.5 derv.
on one post i read that the 2.0l petrol does not need to be bled in the same way as the other two types of engine.
and there for ...

Many thanks for the replies , most helpful

will have a look into both suggestions


kind regards

Hi

Just a quick one,
can any one please tell me if the workshop manuals have torque settings in and things like that.

looking at getting a set for my 2.0l petrol bongo...just in case..


cheers