g8dhe wrote: Tue Sep 21, 2021 8:40 am There isn't a fuel pump at the tank at all its sucked from the tank by the injector pump. Only the petrol versions have a pump sunk into the tank.

Thanks for your clarification.

There is a filter inside the fuel tank, it's on the end of the pickup pipe only accessable if you take the top of the fuel tank.
Instead just blow back to the tank from the fuel filter to clear it.


Thanks for the heads-up on this, I wasn't aware that it existed.

I did this today, I used a ...

Im no mechanic but years ago my vw caddy work van turbo stopped working! Pumped out white smoke, basically unburnt diesel as turbo wasn't wasn't throwing in extra air! Fixed turbo and all was good. Another van i had (Citroën dispatch) a cylinder went and that would be lumpy and wouldn't rev.


I ...

Start by checking the fuel filter is on right and tight.
Remove the fuel pipe at the filter that goes back to the tank, gently blow back to the tank to make sure it's good and clear, they have a little thimble filter on the end of the pickup pipe in the tank, these can get restricted or blocked ...

Have you drained the diesel tank and put fresh diesel in? After such a long lay up it will have gone off and gummy. This will block up your filters and injection system.

Yes, I treated with biocide, left for 2 weeks, run the engine, then changed the fuel filter as said in previous post. The ...

Well not much further on with these issues 😞

I managed to fault find the roof problem, I traced all the wiring, cleaned switch contacts etc. I get the bleeping from the roof module now but the roof still won't raise.

I put power directly to the motors at the plug at the roof module, but no noise ...

I am new to bongos and mine is a ford freda. I have a diesel leak and was advised I need a new pump or refurb. They say they have to take the engine out and this is going to be £1000 . Is this right because I like my little freda but cant afford to spend all this on her. HELP PLEASE BONGO LOVERS ...

i don't know why the pic doesn't appear.

here is the link
https://drive.google.com/file/d/1AM_ryG ... sp=sharing

they chose some interesting names there!

My brain has been methodically working through the wiring schematic, I'm pretty much as far as I can go now. I have made some assumptions and there are a couple of unknowns.

The wiring colour discrepancies i have are;

12 pin connector
2H i have green ...

Thanks for providing this information.

Do you know what the (IN) and (F) adjacent to the colour signify?

Windows here;
Power_windows.JPG

Mirrors here;
remote_controlled_door_mirrors.JPG

You will find little help translating the remaining Japanese all the critical info is already translated!


Thank you very much for your fast response and assistance.

Regarding the roof diagrams, I have now ...

But you missed answering the VITAL question!
"Now press Up the bleeping should start ??" Did it start bleeping ?


Yes I was pressing the switch up, and no there was no bleeping.


Here is the wiring for the AFT module;
AFT_module.JPG

Here is the computer inside it;
AFT_Computer.JPG



Great ...

David <dave8819@googlemail.com>
18:42 (0 minutes ago)
to me


Ah ha! yes Wiring diagrams are still on my server using Flash which is no longer available :-(
The rest of the Fuse & Lamp info is still available on http://www.g8dhe.net/bwm

I can't see any wiring diagrams on this link

However I do ...

Well either go to the top and drive down from https://www.igmaynard.co.uk/
or this forum https://www.igmaynard.co.uk/bongo/forum/
or the Club pages https://igmaynard.co.uk/join-the-club/


Doh! :oops: Thats what the problem was....Thanks for the heads-up.

What I'm looking for now are wiring ...

g8dhe wrote: Fri Jul 02, 2021 8:09 am You are logging into the FORUM and not the MEMBERS areas ? They are two different things and have different Usernames and Passwords ?

Ah! I didn't realize this....I'll check later.
Is there a different landing page for the forums?