Amazing thanks - will check that out shortly!

There is a code 38 in the fact sheet, but doesn't give a definition and says to look it up as P0038 as far as I can see?

Definitely no FEN or TEN pins or wires present.

Just tried using FAT & TAT and got 38 (3 long then 8 short flashes), which I've looked up on www.iequus.com/Dtc as P0038. It came back as:
'HO2S Heater Control Circuit High (Bank 1, Sensor 2)'

Any thoughts on what this could mean? Only glow plug ...

I see - so the ECU controls everything including AT? Had a look inside the connector and there definitely aren't the wires for FEN & TEN, so isn't just a case of missing pins.

If it's the case that there is only one system to interrogate, do you know why both my glowplug light & hold light can both ...

Well spotted! Although I've managed to interrogate the AT successfully in the past, but that doesn't tell you anything about the engine management. Surely there is some overlap between WL, FE & KL (eg temp)?

Also interesting to note that my stereo also has no permanent live feed, although I ...

Am trying to us the diagnostic functions on the ECU to find out why my glowplug light is flashing, as described by Phil McFadden:
http://www.philmcfadden.co.uk/MazdaDiagnosticBox.htm

The problem I'm having is that although my connector appears to have the same pinout as the one on his page, the ...

Yup - level looks fine!

When steering my Bongo has started making a pretty loud/unpleasant squealing noise!

Pretty sure it's coming from both sides - could this be the CV joints?

Does anyone have experience of replacing these themselves? Or is it a job best left to the mechanics?

Am no mechanic but am willing to give ...

Great thanks - will have a hunt!

Do you know if the valves are normally open or normal closed?

Great thanks!

Any idea where I can get a new solonoid valve?

B

Sorry, being thick! It's the drivers side that's oily

Update:
Have removed sensor and it was indeed think with oil! Have cleaned and put back so will see how we go!

Took a while to take a look but this is what I found:
• The vacuum In & Outs of the 1st solonoid (18-741C - the one nearest the front) have snapped off, and the small white plastic double 'T' piece (13-945J) had become totally disconnected. Have reconnected the T piece but the broken solonoid needs ...

Amazing thanks!

I think the grey one is slightly bigger (same size as full beam light).
Will PM you address

3 small black (for the red indicators either side of the panel)
1 x grey (for the glow plug light)

Didn't really think anything of the fact that it didn't have a HOLD light until the gearbox blew up a month ago. Took the instrument panel out and realised that it was also missing the roof light ...