Page 1 of 1
Auto Box Error Codes
Posted: Sun Dec 10, 2006 9:18 pm
by BongoDave
Hi
Can any one help me i've had the flashing hold light come on my bongo i've read the fact sheet about this and have come out with this code 1 LONG 1 SHORT 1 LONG 2 SHORT and help would be appreciated?
Many Thanks
Dave
Posted: Sun Dec 10, 2006 9:29 pm
by Peg leg Pete
Welcome Dave, I will check out the code for you, Our bongo has an intermittent flashing hold problem, linked to the chip on the speedo, I pull up turn off the ignition,restart and away we go
Posted: Mon Dec 11, 2006 2:25 pm
by Doone
There are 2 factsheets which give advice on this - 'Hold Light' and 'Transmision Fault Codes'.
Posted: Tue Dec 12, 2006 9:58 am
by BongoDave
I've looked at both the fact sheets and cant seem to find the codes it looks like code 11 and code 12 is that right?
Posted: Tue Dec 12, 2006 10:22 am
by Ian
Look on page 2 of the transmission fault code fact sheet. There is no code 11, but code 12 is the throttle position sensor.
Posted: Tue Dec 12, 2006 3:46 pm
by BongoDave
Does any one know where the throttle position sensor is located as i can borrow a friends Bongo and change it over before i buy a new one
Many Thanks
Dave
Posted: Tue Dec 12, 2006 4:18 pm
by Ian
Try the search facility. Use the search term "Throttle AND sensor" (exactly as written but without the quote marks).
http://www.igmaynard.co.uk/bongo/forum/ ... de=results