Bongo Fury

Hi All,

Would probably by useful if there was a brief fact sheet on this as it appears I am not the only person struggling to get correct M8 bolt.

It is suggested on here that a 1.5 or 15 mm thread is required.

Standard thread size for M8 I believe is 0.7 mm.

If it is 1.5 supplier links would also be appreciated.

Thanks,

Mike

Try T E Stone, Old Market, Bristol.

https://www.yell.com/biz/te-stone-ltd-bristol-54600/

If its the threaded inserts in the roof, be sure to use a corrosion proof / stainless steel bolt. If they bind at all you can have a fun time trying to get them out as the inserts may lose their grip on the roof structure (from old half remembered memory!)

mike_glos wrote: Wed Mar 07, 2018 8:14 am Hi All,

Would probably by useful if there was a brief fact sheet on this as it appears I am not the only person struggling to get correct M8 bolt.

It is suggested on here that a 1.5 or 15 mm thread is required.

Standard thread size for M8 I believe is 0.7 mm.

If it is 1.5 supplier links would also be appreciated.

Thanks,

Mike

https://www.ebay.co.uk/itm/A-Pack-20-A4 ... V2vaVeBJMQ

Thanks All. much appreciated

I got a bag of M8 with hex key head from Screwfix, fitted perfectly. Got loads over if you’re struggling pm me and I’ll see if I can find them..

Useful info, thanks.

Yes to be fair the set of M8s I had already got from ebay did the job:

https://www.ebay.co.uk/itm/M8-8mm%C3%98 ... 2749.l2649