Page 1 of 1
What size 12 point socket for head bolts?
Posted: Mon Jan 22, 2018 12:01 am
by frinkemon
Hey All,
I'm replacing the head as mine had most likely succumbed to something or other.. Just want to buy a 12 point socket, anybody know what size?
Thanks,
Leigh
Re: What size 12 point socket for head bolts?
Posted: Mon Jan 22, 2018 12:15 am
by Bob
Which engine have you got?
I'm guessing not the V6 as you say 'head'.
Re: What size 12 point socket for head bolts?
Posted: Mon Jan 22, 2018 9:07 am
by cutlass
on diesel 14- after turning the corner -check torque moment - "thin" apr 90 Nm, "fat" -apr 130 Nm
Re: What size 12 point socket for head bolts?
Posted: Mon Jan 22, 2018 1:33 pm
by teenmal
I posted this a few years ago, here it is again.
http://www.manualesdemecanica.com/image ... 6cf9ca.pdf
Take care
Re: What size 12 point socket for head bolts?
Posted: Mon Jan 22, 2018 3:03 pm
by cutlass
"where did you get these figures from as the ranger manual I have says 29nm then 90deg. and then another 90deg" - I turn bolt and look what crushd before - my old head, my old block or bolt.....and ask any people - check torque too....it dont "techinfo" from manual book - it only experienced
