Bongo Fury

Hi
I've got hold of the MX5 clock/cubby combination. It has been supplied with the plug.
I just wondered if anyone could help with which wires to connect up to get it working.
I beieve I will only need a live and a negative but don't know if thats right or even which colours they might be.
It's too much to hope they are simply red and black.
Thanks in advance.

does this sort of thing help any.

http://mazdamenders.net/~mazdamen/forum ... php?t=2801

Northern Bongolow wrote:does this sort of thing help any.

http://mazdamenders.net/~mazdamen/forum ... php?t=2801

Thank you. Yes, this does half the job for me. Now I need to identify which are the equivalent wires on my bongo. I'm afraid I have no electrical skills at all and I wouldn't know how to use an electrical tester even if I had one. I'm hoping I can identify them by coulour at some point.

Thanks for the reply. Very helpful as a start.

The wiring on the stereo plug where you can take feeds from (soldered) are :

BLUE / RED +ve PERMANENT

BLUE +ve IGNITION

RED / BLACK ILLUMINATION

BLACK (thin) NEGATIVE

BLACK / RED (heavy) NEGATIVE

TheNewRooster wrote:The wiring on the stereo plug where you can take feeds from (soldered) are :

BLUE / RED +ve PERMANENT

BLUE +ve IGNITION

RED / BLACK ILLUMINATION

BLACK (thin) NEGATIVE

BLACK / RED (heavy) NEGATIVE

And that completes the circuit I do believe.
Many thanks..

bonetti wrote:
And that completes the circuit I do believe.
Many thanks..

You are more than welcome.

TheNewRooster wrote:The wiring on the stereo plug where you can take feeds from (soldered) are :

BLUE / RED +ve PERMANENT

BLUE +ve IGNITION

RED / BLACK ILLUMINATION

BLACK (thin) NEGATIVE

BLACK / RED (heavy) NEGATIVE

Welcome back dude - great to have you back on here

Good to have you back Rooster!!!!!

mikeonb4c wrote:
Welcome back dude - great to have you back on here

Cheers Mike.

haydn callow wrote:Good to have you back Rooster!!!!!

Thanks Haydn