Bongo Fury

2 issues you might be able to help, easier first

Haydn alarm: in putting right damage caused by someone trying to steal the Bingo, I've pulled a wire free so alarm no longer working It's the red/black of the paired wire. Not sure if this goes to earth or ign switched 12v?

Mason alarm: this has stopped working as it used to, now screeches when ign is tuned on and goes out when engines is started. Turning the temperature control also sees to have no effect now. I thought the temp control used to have a stop but it just rotates all the way around. Anyone else had this issue and managed to solve? Am about to take the van to Wales for a week! Thanks.

Hi

The Red/Black Wire on a Haydn Alarm is Negative which goes to the vehicles EARTH, the solid Red is POSITIVE and must be connected to a fused connection that switches on and off with the ignition.

If you get in touch on [email protected] i'll send through a electronic copy of the instructions so you have all the info.

Hope this is helpful any other problems just get in touch if I can't answer your questions I'll get Dad/Haydn to help.

I'm sorry I can't help with the Mason Alarm.

Jo @ Haydn Alarms

Great, thanks Jo. I should be fine with this the other wires are secure.