REAR BULB HOLDER
Posted: Wed Feb 04, 2015 10:52 am
BOTTOM REAR BULB HOLDER IS COMPLETELY CORRODED WHERE DO I GET REPLACEMENT
MAZDA,EBAY,SCRAPPIE,MOTOR FACTORS ETC ETC.
GOOD LUCK.
Page 1 of 1
Re: REAR BULB HOLDER
Posted: Wed Feb 04, 2015 11:10 am
Re: REAR BULB HOLDER
Posted: Wed Feb 04, 2015 1:16 pm
I've heard of strange things in bottoms but never a corroded bulb holder 
. Is it the rear light cluster (brake, indicator, sidelight) that is affected? if so, you will need the complete light cluster & there are 3 types so you best bet is to find a breaker on ebay. Expect to pay £40 - £60 for complete unit.
Alternatively, are you referring to rear fog light dangling below the bumper? If it's that, then any motor parts supplier will have one from about £5.
Get some WD40 on the shift key too. The use of caps is considered as being very SHOUTY
. Is it the rear light cluster (brake, indicator, sidelight) that is affected? if so, you will need the complete light cluster & there are 3 types so you best bet is to find a breaker on ebay. Expect to pay £40 - £60 for complete unit. Alternatively, are you referring to rear fog light dangling below the bumper? If it's that, then any motor parts supplier will have one from about £5.
Get some WD40 on the shift key too. The use of caps is considered as being very SHOUTY
Re: REAR BULB HOLDER
Posted: Wed Feb 04, 2015 3:06 pm
Simon Jones wrote:
Get some WD40 on the shift key too.
Cheers
Helen
Re: REAR BULB HOLDER
Posted: Wed Feb 04, 2015 5:01 pm
The rear bulb holders (3 off)are on a loom, you can cut the offending corroded holder from the loom and connect a new holder to the loom.
I done one a few months ago, cant remember what holder I used it was one (not labelled) from the workshop.
If I find the origin of the holder I will PM you the details.
I done one a few months ago, cant remember what holder I used it was one (not labelled) from the workshop.
If I find the origin of the holder I will PM you the details.