Bongo Fury

Hi All
I have discovered a switch in my roof when raised it says cancel lock can anyone explain what this switch is for?
Cheers
Steve Wales

You need to press this switch to allow the roof to lower! Its a safety device, to make sure you check what's in the roof before lowering it! The roof will also stop half way down and will require the normal raise/lower switch to be released and pressed again to complete lowering again a safety check to make sure that the material is laying correct and that nothing is going to jam the roof when fully lowered.

Looks like this is related to your other thread http://www.igmaynard.co.uk/bongo/forum/ ... 04#p627104

The switch you mention in this thread is the Roof Lock Cancel switch, it allows you to unlock the roof to allow lowering it.
If there wasn't this safety feature you could squash a person or equipment inside the roof, just by touching the raise/lower switch ....

Might be worth investing in an owners manual (around £20) which will explain all the controls for you.

http://www.igmaynard.co.uk/bongo/mercha ... tm#Manuals

Hi All
Thanks for the info very grateful
Cheers
Steve
Wales