Bongo Fury

Horn suddenly stopped working and as my manual is in Japanese.......
No idea how to fix it.
If you do, please help

I'd start with the fuse, but of course I can't remember which one it is.

Someone will soon help out.

Its normally the connections at the horn that have rusted away rather than the fuse, its the most forward thing on the vehicle and gets all the spray over it! However the fuse is a 10 Amp (Red);

mine has too, I think it is the same relay as the headlights and this was a bit dicky so gonna get it checked

if you remove the front grill and drivers side headlight you will see the wire from the loom (low down behind the under headlight panel) this is the positive supply, check its live when the horn is pressed, then there is a short earth wire to the body.
if twin horns are fitted the positive then jumps across the top of the rad to the passy side horn.

the connections usually just get crudded up.

Thanks Peeps. Will get checking. I hate not being able to Paaaaarp!