Page 1 of 1
rubber bits at top and bottom of suspention springs
Posted: Sun Aug 04, 2013 2:52 pm
by chipvan
anyone know what these are called mine are falling to bits,and the gaitor round the shock as this is split.
been having a clonk over bumps when braking
2 years ago new nearside wishbone
1 month ago front and rear anti roll bar bushes,track rod ends,drop links,and off side wishbone
Re: rubber bits at top and bottom of suspention springs
Posted: Sun Aug 04, 2013 3:26 pm
by helen&tony
Hi
They are in the diagram here:
http://lushprojects.com/bongopartsmk2/c ... no=.html#5
The bottom one seems to be called a seat, and the top, a sheet
I had mine replaced with the shockers...and I had the bump-stops and bellows done, too.
The rubber inserts make more of a metal-against metal squeak when they disintegrate....
I took the parts to the garage to do....I can't do very much in the cold as was at the time....
Cheers
Helen
Re: rubber bits at top and bottom of suspention springs
Posted: Sun Aug 04, 2013 3:27 pm
by teenmal
chipvan wrote:anyone know what these are called mine are falling to bits,and the gaitor round the shock as this is split.
been having a clonk over bumps when braking
2 years ago new nearside wishbone
1 month ago front and rear anti roll bar bushes,track rod ends,drop links,and off side wishbone
Upper and lower rubber spring seats....
Re: rubber bits at top and bottom of suspention springs
Posted: Sun Aug 04, 2013 3:30 pm
by teenmal
helen&tony wrote:Hi
They are in the diagram here:
http://lushprojects.com/bongopartsmk2/c ... no=.html#5
The bottom one seems to be called a seat, and the top,
a sheetI had mine replaced with the shockers...and I had the bump-stops and bellows done, too.
The rubber inserts make more of a metal-against metal squeak when they disintegrate....
I took the parts to the garage to do....I can't do very much in the cold as was at the time....
Cheers
Helen
They are just letting you know that the sheet goes to the Top.
Only kidding its a misprint it is a seat.