Page 1 of 1
Hold light
Posted: Mon Jul 08, 2013 8:10 am
by greengaz
Hi all, Still got a problem with the flashing "hold" light on my n reg Bongo. I have bought a lead and have plugged it into 3 different diagnostics readers, No joy. I have jumped wires in the diagnostics socket and got a flashing code of ; 1 long flash,6 short, 6 long, 2 short,9 short flashes. Any help would be appreciated with this as I am waiting to go to France in it.
Thanks, Gaz
Re: Hold light
Posted: Mon Jul 08, 2013 8:19 am
by mikeonb4c
You'll probably need a specialist. Whereabouts are you?
Re: Hold light
Posted: Mon Jul 08, 2013 8:58 am
by Doone
Re: Hold light
Posted: Mon Jul 08, 2013 1:37 pm
by greengaz
Hi Mike I am in wolverhampton.
Any help would be much appreciated.
Cheers Gaz
Re: Hold light
Posted: Mon Jul 08, 2013 1:55 pm
by mikeWalsall
I have had this guys card pushed under my wiper blades when parked both in Bilston and Wolverhampton .. I've never used this company or know anything about them .. maybe give them a try they may be able to help .. or know of a man who can ..
http://www.ebay.co.uk/itm/mazda-bongo-f ... 35c8a415a4
Only in Wednsebury so quite local ..
Dennis Eglington
Unit 6 Horton Place
Wednesbury
West Midlands
ws10 8hg
United Kingdom
Phone:07850|870145
Re: Hold light
Posted: Mon Jul 08, 2013 5:40 pm
by mikeonb4c
greengaz wrote:Hi Mike I am in wolverhampton.
Any help would be much appreciated.
Cheers Gaz
Might be worth phoning Ian Taylor (can't remember if he's Market Drayton or Stoke on Trent these days) to see is he could recommend someone or take a look himself. He's very good and a Bongo expert. Good luck - keep us posted.
Re: Hold light
Posted: Mon Jul 08, 2013 6:17 pm
by greengaz
Thanks to all for the suggestions, I have had a poke around with a few connections, and at the moment its working like it should. I don't know for sure if I have done anything. Would this mean its likely to be a contact problem? or could it be more serious even though its working at the moment?
Any suggestions appreciated even if its to eliminate any problem.
Cheers guys G.
Re: Hold light
Posted: Mon Jul 08, 2013 6:55 pm
by mikeWalsall
I had a similar situation with my ABS light ..
It seems fine know .. the final solution seems to have been a multi pin plug not fully 'clicked' in ..