Page 1 of 1
flip down seat internals
Posted: Wed Apr 03, 2013 12:35 pm
by cookan
Hi guys,
I'd like to try to fit some rear head rests to my rear flip down seats and rather than have my wife unpick the seat covers to see what the construction looks like inside I wondered if anyone had any pictures of the internals (perhaps from a upholstering project?) that I could look at to get an idea of what might be involved before progressing...
thanks,
Ant.
Re: flip down seat internals
Posted: Wed Apr 03, 2013 2:16 pm
by bongobaz
Re: flip down seat internals
Posted: Wed Apr 03, 2013 4:10 pm
by cookan
cheers mate, looks promising...am I right in thinking those are pics of the seat base only btw ? If the seat back is a similar construction, shouldn't be too difficult to weld a couple of tubes on to accept a headrest...
thanks,
Ant.
Re: flip down seat internals
Posted: Wed Apr 03, 2013 6:24 pm
by mikeonb4c
I made clip-over ones like car shops sold in the sixties, and used spare Bongo headrests for them. Worked a treat. It'd be a shame to butcher a good pair of seats if it can be avoided.

Re: flip down seat internals
Posted: Thu Apr 04, 2013 9:45 am
by cookan
yeah, I read some of the posts on clip on/slip over headrests on the forum and found some ones on ebay also but I'd like to do something that'll be smaller to store (3 kids+2 adults in a bongo for a month means every inch of space counts !). I'm up in Leeds atm so can't do any work on the bongo but had a bit of a dig last night and feels like there's plenty of exposed framework on those back seats to be able to weld some restraint tubing...if I can source some bongo headrests and inserts it'll look like it'd always been part of the car hopefully !. The seat material looks like it's just held on by some split rings under a velcro flap which if I can remove, should be able to just pull the seat covers off to see what's what inside..might then lace them back up instead of trying to re-ring them so their easier to take off in future and wash...
Ant.
Re: flip down seat internals
Posted: Mon Apr 29, 2013 12:32 pm
by cookan
just to complete this thread, picture of the inside of a flip down seat....
https://docs.google.com/file/d/0B1-Cw4u ... sp=sharing
I now have a headrest on my rear flip down seat so very pleased with that (as will my son who has outgrown his child seat).
thanks,
Ant.