Bongo Fury

Hi all, Can any of you tell me the were to find the TDC sensor is on a2000 2500 V6 is located. Thanks in advance. John.

Hi,do you mean the crankshaft position sensor?

drop the tray under the engine, climb under tand its located at the front bottom of the engine, held in with a 10mm iirc

Julian

I think you'll find its 18-230 on this diagram;
http://lushprojects.com/bongopartsmk2/c ... no=.html#2
and that referees to 14-100 on this one;
http://lushprojects.com/bongopartsmk2/c ... mgno=.html

Hello John, Allan spoke to you this morning. If you remove the engine tray underneath the engine, and look at the crankshaft pulley, you'll see the sensor to the bottom right.