Page 1 of 1
My reversing alarm has lost the plot!
Posted: Wed Apr 25, 2012 11:49 am
by TerryG
It's thrown a wobbly and now either sulks silently or screams hysterically. Can anyone tell me where the brute is located? I presume the switch is under the centre console somewhere.
Re: My reversing alarm has lost the plot!
Posted: Wed Apr 25, 2012 12:13 pm
by rita
Hi,
This might help,if you only want to stop the reversing beeper,remove the red wire with the yellow tracer(on the plug)that should stop the reversing beep..
http://www.youtube.com/watch?v=avbhnk8k8lI
Re: My reversing alarm has lost the plot!
Posted: Wed Apr 25, 2012 12:14 pm
by 321Away
drivers side kick panel, little blue box fixed to outer bulkhead, just cut the red/yellow wire
Julian
Re: My reversing alarm has lost the plot!
Posted: Wed Apr 25, 2012 12:38 pm
by TerryG
It shall be done!
Many thanks folks
Re: My reversing alarm has lost the plot!
Posted: Wed Apr 25, 2012 1:16 pm
by Simon Jones
Have you got ultrasonic reversing sensors, or just the regular annoying beepy thing?
Re: My reversing alarm has lost the plot!
Posted: Wed Apr 25, 2012 2:08 pm
by TerryG
Simon Jones wrote:Have you got ultrasonic reversing sensors, or just the regular annoying beepy thing?
I've got after-market reversing sensors with a little unit containing a speaker and flashing red light, as well as the 'regular annoying beepy thing'. Both seem to be playing up at the moment, which seems odd as I didn't think they were connected in any way, though as I didn't fit the sensor system I don't know if that's the case or not. I shall cut the beepy thing's life support line tomorrow as suggested, and see what effect that might have on the other system.
Terry