Bongo Fury

can any one point me to an "idiots guide" on how to do this?.......really have not got a clue where to start, but i do hate the way the dangly spoils the lines of my body kit!!

You strip the offside lamp cluster, cut a hole for the bulb in the lowest "spare place" for a bulb and fit a 21W bulb in.

There's a "how to" with pics by missfixit somewhere in search.

dandywarhol wrote:You strip the offside lamp cluster, cut a hole for the bulb in the lowest "spare place" for a bulb and fit a 21W bulb in.

There's a "how to" with pics by missfixit somewhere in search.

And make sure that you make a hole big enough for it (your dangly) to fit comfortably!


Frank

you should do this

http://www.igmaynard.co.uk/bongo/forum/ ... h=88f75e93

MAZABON wrote:you should do this

http://www.igmaynard.co.uk/bongo/forum/ ... h=88f75e93

sorry, not replace it with a flush fit bumper one......actually house it in the right hand rear light cluster

ahh, think they look quite good in the bumper though

think dandywarhol is refering to this

http://www.igmaynard.co.uk/bongo/forum/ ... +fog+light

no need to do any cutting

i have my rear fog in where the reverse light was all i done was cut the reverse light wires and connected the dangly wires oh and put a red bulb in job done

As has been said many times before though Carl, doing it the way I did it on the thread above, by adding the foglight in the "spare" reflector, you don't lose a reverse light (Yes we know you fitted a reverse camera & didn't need it, but some of us still need it ) Even Dandy came around to the idea eventually

bongobaz wrote:

Thanks, although i have just taken my rear cluster off and it is different to yours (mines a 2002 model), but i think it can still be done....there seems to be space just below and to the side of the rear tail lamp, although i am not too sure if this would interfere with the light being given off by the tail lamp when both this and the fog lamp are switched on....?

Stick a pic of yours up then.