Bongo Fury

Hi Guys and Girls, My central locking has stopped working is it likely to be the fuse or something more serious. Thanks Kazanne

Is this the manual locking to all doors that works from the drivers door only, then?
Try checking yer 30A fuse in the cab first.. (top row green one 4th from the left)
Then try the drivers door loom..? With the door open lock & unlock the door from the inside & juggle the loom or strip the loom casing off & check the bundle for chaffing or breakage..
You could take the door card off first & see if the connection block to the CL has come adrift?? ( Its in the centre of the door. If i remember?)
If all is OK the CL relay could be down..?

Very common for the loom to fail where it passes between the A pillar and the door.

Simlpe enough to solder back up.

Yes when I lock or unlock drivers door thats the only one that works. Will look at fuses tomorrow in the daylight and try that first. Many thanks.

Could just be low battery? mine played up when my LB was dying last year.