Bongo Fury

Morning all,

I know alot of you have Pela pumps for shifting that pesky oil, and i think i should too.
Which model are you all using? I see there are a few 'professional' level ones, which do have a good capacity. Are the 'consumer' models ok, and is the 6l capacity enough to get it all out without problems? The oil filter will still hold a little anyway won't it?

So there you go, a whole load of questions for you.

Craig

Mine is 6l capacity, just keep an eye on it and empty it before it fills, then start again.

My view is you really don't need to spend the money on a professional model, unless yuo are going to use it many times a day like a garage would.

Good bit of kit I recon.

I use the 6.5 litre version, just enough to catch it all before it spills onto the garden

The bottom one HERE

Done!

went for the 6000 from Machine Mart

just have to keep an eye on it overflowing

cheers peeps,
Craig

Wow you should have waited a bit Spit. The Machine Mart prices are a tad expensive, same pumps are cheaper from mailspeed Marine.

http://www.mailspeedmarine.com/tools-re ... 4535.bhtml

Tony

good job their website seems to be faulty!
Put one in my basket, went to checkout, and it was gone! tried it a few times.
It must have a hole in the bottom...