Page 1 of 1
Fitting a new CD/MP3/Radio
Posted: Tue Sep 23, 2008 1:45 pm
by monkey
Does anyone have knowledge of the wiring arrangements in the Bongo-realise mine may not be typical. I have identified the speaker cables successfully (all 8 of them) but am struggling to match up the remaining cables. Is there a typical configuration for battery (positive and negative) ground lead and anything else that might be in the set?
Any help appreciated.
Re: Fitting a new CD/MP3/Radio
Posted: Tue Sep 23, 2008 2:26 pm
by welsh winger
Hi monkey I used this ISO lead from ebay item 160283179883, can recommend it and the seller.
Nick
Welsh winger
Re: Fitting a new CD/MP3/Radio
Posted: Tue Sep 23, 2008 3:55 pm
by francophile1947
Conversion lead, as recommended by welsh winger is best bet - makes the installation a 5 minute job
Re: Fitting a new CD/MP3/Radio
Posted: Tue Sep 23, 2008 7:07 pm
by bigdaddycain
Yep, i have ISO connectors on mine too..dead simple.
Bongo Stereo Wiring.
GREEN / YELLOW
FRONT O/S SPEAKER
MINT GREEN / RED
PURPLE
FRONT N/S SPEAKER
BLUE /GOLD
ORANGE
REAR N/S SPEAKER
YELLOW / RED
WHITE
REAR O/S SPEAKER
GREEN / GOLD
BLUE / RED +ve PERMANENT
BLUE +ve IGNITION
RED / BLACK ILLUMINATION
BLACK (thin) NEGATIVE
BLACK / RED (heavy) NEGATIVE