Fitting a new CD/MP3/Radio

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
monkey
Bongonaut
Posts: 78
Joined: Tue May 16, 2006 6:43 am
Location: Ripon area North Yorkshire

Fitting a new CD/MP3/Radio

Post by monkey » Tue Sep 23, 2008 1:45 pm

Does anyone have knowledge of the wiring arrangements in the Bongo-realise mine may not be typical. I have identified the speaker cables successfully (all 8 of them) but am struggling to match up the remaining cables. Is there a typical configuration for battery (positive and negative) ground lead and anything else that might be in the set?
Any help appreciated.
welsh winger

Re: Fitting a new CD/MP3/Radio

Post by welsh winger » Tue Sep 23, 2008 2:26 pm

Hi monkey I used this ISO lead from ebay item 160283179883, can recommend it and the seller.

Nick

Welsh winger
francophile1947
Supreme Being
Posts: 11354
Joined: Mon Dec 18, 2006 6:15 pm
Location: Norwich

Re: Fitting a new CD/MP3/Radio

Post by francophile1947 » Tue Sep 23, 2008 3:55 pm

Conversion lead, as recommended by welsh winger is best bet - makes the installation a 5 minute job :D
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Re: Fitting a new CD/MP3/Radio

Post by bigdaddycain » Tue Sep 23, 2008 7:07 pm

Yep, i have ISO connectors on mine too..dead simple. :wink:



Bongo Stereo Wiring.

GREEN / YELLOW
FRONT O/S SPEAKER
MINT GREEN / RED


PURPLE
FRONT N/S SPEAKER
BLUE /GOLD


ORANGE
REAR N/S SPEAKER
YELLOW / RED


WHITE
REAR O/S SPEAKER
GREEN / GOLD


BLUE / RED +ve PERMANENT

BLUE +ve IGNITION

RED / BLACK ILLUMINATION

BLACK (thin) NEGATIVE

BLACK / RED (heavy) NEGATIVE
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
Locked

Return to “Techie Stuff”