Bongo Fury

My horn has stopped working, I have checked the wires they seem fine and checked the fuses. Anybody know which fuse is for the horn?

On models up to Sep 2001, it's a red 10amp one, 5th from the left on the top row of interior fuses. Edward had a similar problem recently, so if replacing the fuse doesn't fix it, have a look at his post: http://www.igmaynard.co.uk/bongo/forum/ ... =horn+fuse

Cheers for the speedy response. Changed the fuse still no horn.Defo not the fuse must be a loose connection somewhere

unfortunatly i still have no horn, i think that when i removed the washer bottle i've knocked a wire connection, as i have a loose blue wire connected to the horn wiring with the other end hanging lose and it looks as if it has broken off somewhere. I have after market twin horns and i'm hoping that one of the Bongos attending the Looe bash has the same type of horns as mine, so as i can compare wiring

Jolly Rogers wrote:Cheers for the speedy response. Changed the fuse still no horn.Defo not the fuse must be a loose connection somewhere

Have you tried putting 12v directly onto the horn this would prove the horn one way or tother?

Sparky

Have managed to trace a break in the cable Hopefully that's causing the problem. Will try and fix at the weekend.

Can you here the relay click when you press the horn button?



I can't help my self:...

No click can be heard

Jolly Rogers wrote:No click can be heard

This is a simple wiring circuit of a horn installation, might help.

Is the break between the button and the relay?

On the Bongo the circuit is not powered through the ignition switch and the fuses are not shown.

lizard wrote:

Jolly Rogers wrote:No click can be heard

This is a simple wiring circuit of a horn installation, might help.

Is the break between the button and the relay?

On the Bongo the circuit is not powered through the ignition switch and the fuses are not shown.

It is just by the horn.

The relay should click even if the horn is not working, Check all the earth cables the horn one first.

A test between an earth point and the horn feed cable with the horn disconnected with a meter/lamp will tell if the relay is working and the cable from the relay is ok.

Cheers . I dont have a meter to test it though