Page 1 of 1

If anyone want's more fitting LED's, spots, etc

Posted: Thu Jun 12, 2008 11:08 pm
by roosteruk
If anyone want's other things beside coolant alarms fitting, just ask before I go.
I will be available (hopefully) to consider the extra service in between fitting alarms.
Just put a post up and I will let you know if it can be done or not.
Weather permitting !!! :roll:

All monatory donations, gratefully received.... :lol:

Re: If anyone want's more fitting LED's, spots, etc

Posted: Thu Jun 12, 2008 11:22 pm
by roosteruk
Hi Keith,
Get to where you need , eg, fitted to the vehicle and I can wire them up.
I am taking all the necessary stuff, cable, crimps, convoluted tube, etc, etc.
I will also have relays and illuminated switches (non Mazda).

Cheers

Karl

Re: If anyone want's more fitting LED's, spots, etc

Posted: Thu Jun 12, 2008 11:26 pm
by Bob
Top man Rooster, what a kind offer.

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 10:08 am
by mr and mrs pips
roosteruk

could I ask for you to check out my front spots. All fitted and wired, never worked :cry: ?

No switch on dash. ?

regards mrs P

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 11:59 am
by haydn callow
As most of you know, apart from the coolant alarms I supply BMW clocks that fit perfectly under/over your radio/CD. I will have a supply with me and I can fit orange/white/blue/green backlights to match your dash/radio, I also have metal "bling" dial rings and I can enen do a white dial/face.They come fully checked out and with labled wires.
The negotations for the supply of Engine Watchdog TM2 temp alarms is progressing well and I hope to have some in a couple of weeks. They cost £73 from Oz and you can expect to pay around £20 on top of that for customs/post office handling. That makes them around £90/95.
I'm hoping to be able to pass them on to forum members for around £68.

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 5:36 pm
by roosteruk
mr and mrs pips wrote:roosteruk

could I ask for you to check out my front spots. All fitted and wired, never worked :cry: ?

No switch on dash. ?

regards mrs P
Of course I will check them out.
I will be able to fit an illuminated switch, but it will not be a Mazda one. It must be illuminated or illuminate a warning light on the dash to meet with legal requireements.
If you want to get hold of a switch yourself, I will try and fit that if you wish?

Regards

Karl

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 5:52 pm
by Holly
Roosteruk

Are you good with electrics? Could you check my drinking water pump to see if it's really dead?

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 5:54 pm
by roosteruk
Holly wrote:Roosteruk

Are you good with electrics? Could you check my drinking water pump to see if it's really dead?
I am ok I think, maybe you could ask around about me if you are not sure.....I Will have a look for you.
:lol:

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 5:55 pm
by mikeonb4c
roosteruk wrote:It must be illuminated or illuminate a warning light on the dash to meet with legal requireements.
Woops, never thought of that. Mine doesnt. Oh well, another job to do :lol: :lol:

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 6:03 pm
by mr and mrs pips
roosteruk wrote:
mr and mrs pips wrote:roosteruk

could I ask for you to check out my front spots. All fitted and wired, never worked :cry: ?

No switch on dash. ?

regards mrs P
Of course I will check them out.
I will be able to fit an illuminated switch, but it will not be a Mazda one. It must be illuminated or illuminate a warning light on the dash to meet with legal requireements.
If you want to get hold of a switch yourself, I will try and fit that if you wish?

Regards

Karl


Fantastic - I will see if I can get hold of a Mazda switch with a light, if not whatever you have will be great.

We will be looking out of the weather vane possibly Thu or definatly Friday depending on the 13 week old lads ability to travel. see you there..

Regards Mr & Mrs Pips

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 6:11 pm
by haydn callow
Had a word with Karl....he's going to be busy.....you could expect to pay £15/20 to get a clock fitted at a garage/auto electrician. For the Bash only Karl will fit them for a FIVER. You will see my basic clocks on ebay for £24.......get one fitted at the bash for £25 all in.
coloured glows, metal rings etc extra.

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 8:19 pm
by B*Witched Blingo
Oh just found this one and a song popped into my head.. Dreeeeam, dream dream dream, dreeeeam... One day when I'm biggerer hehehehe..

I have to say DBO's ickle twinkle lights inside look really good...

Re: If anyone want's more fitting LED's, spots, etc

Posted: Fri Jun 13, 2008 8:38 pm
by haydn callow
Pendle ? is that near Downham just north of Chatburn. When I was a scout (50 years ago) 3 of us did a trek over Pendle Hill, we found 3 unexploded mortor bombs (it was used as a range in the war) the local Bobby in Whalley did a runner when we walked in with them. Ah !! happy days..

Re: If anyone want's more fitting LED's, spots, etc

Posted: Sat Jun 14, 2008 11:05 am
by B*Witched Blingo
Yup Pendle, Downham, Chatburn Gisburn, Barley all that area.. Lubbley..Born and Bred was filmed at Downham. Must come back. Quite a pretty area.. Hotpot on one side of Mother Hill were on the other.

Happy memories with the Bomb then?

Sorry Rooster off Subject a tad..

Right Back to Lectricory. hehehehehe